Narrow decorative planter boxes designed to be hung from a wall or fence.
These are handmade from profiled 'decking' timbers, which gives them distinctive horizontal ribs on the front face, which also run vertically down the sides.
These planter boxes have two screw eyes in the top, allowing them to hang from hooks or screws in your fence or wall. Alternatively, decoratative rope or chain could be used if your existing fixings are at different spacings.
We have currently made the shapes and size listed below, but would consider making others if you have something specific in mind.
Rectangular
145mm wide (110mm internally)
350mm long (300mm internally)
305mm deep (240mm internally) excluding hanging eyes.
£25
Right-angle triangle (90° in the base)
145mm wide (110mm internally)
350mm long (300mm internally)
305mm deep (240mm internally) excluding hanging eyes.
£25
Equilateral triangle (60° in the base)
145mm wide (110mm internally)
350mm long (300mm internally)
305mm deep (240mm internally) excluding hanging eyes.
£20
General Information
These products are supplied fully assembled, please see our delivery information page here.
All our timber garden products are made from pressure treated timber. In addition, all cut edges are treated with additional wood preservative to give the best possible life.
This product is made with rough sawn timber, so is suitable for staining or painting with a range of widely available fence or decking type treatments For an additional cost we can treat this with the product of your choice prior to delivery.